I now have an mc22 petrol tank complete with inbuilt fuel pump, filter & pressure regulator assembly.
Using the mounting flange which I cut from the ZX6R tank, I cut a hole in a spare mc22 tank and welded the ZX6R mounting flange in place. Pressure tested for leaks and all is good. The tank will need a clean out before use but is otherwise ready to go.
Using the mounting flange which I cut from the ZX6R tank, I cut a hole in a spare mc22 tank and welded the ZX6R mounting flange in place. Pressure tested for leaks and all is good. The tank will need a clean out before use but is otherwise ready to go.
 |
| Flange welded in place |
 |
| With pump installed |
1 comment:
I got some wonderful knowledge from this post. The post is very informative and contains some best knowledge of mounting flange tank step. Thanks for sharing it. watlow f4t
Post a Comment